Cityflor Warm Roof Multi Layer Living Roof
A reliable BBA approved living roof waterproofing system, providing enhanced durability and a longer guarantee of 25 years.
Va
Vernis Antac Primer
VERNIS ANTAC is a solvent-based, rapid drying bituminous primer specially modified with an adhesive. The product is supplied ready to use. For full product information please refer to the Technical Data Sheet.
V.a
VAP AL
An air and vapour control layer (AVCL) low permeability membrane used as part of a system to control the movement of air, water vapour and heat leakage from within the building. Can also be used as base or underlayer in a multilayer waterproofing system.
Hs
Hyrastik EVO Adhesive
Hyrastik Evo is a high performance, single-component, moisture-curing polyurethane insulation adhesive with green credentials. It has been developed to provide a safe and effective solution to bonding insulation securely to various roof decks.
Used in:
- Solar PV Flex
- Solar PV
- Biosolar PV
- Force® ADH Flame Free Waterproofing System
- Neo-Bitumen® Flame Free Waterproofing System
- Aquamodul® Blue Roof
- Force® Waterproofing System
- Ecoflex® Waterproofing System
- Force® Line Waterproofing Systems
- Force Dalle® Waterproofing System
- Hyranger® Waterproofing System
- Cityflor® Waterproofing System
- Excel® Waterproofing System
Hth.adh
Hytherm ADH
A durable, lightweight PIR insulation for warm roofs (flat board or tapered). Hytherm ADH PIR insulation is a high performance board used in warm roofs under fully adhered reinforced bituminous membranes, mastic asphalt and approved single ply waterproofing systems. Please refer to the datasheet for more details.
Used in:
- Solar PV Flex
- Solar PV
- Biosolar PV
- Force® ADH Flame Free Waterproofing System
- Neo-Bitumen® Flame Free Waterproofing System
- Force® Waterproofing System
- Ecoflex® Waterproofing System
- Force® Line Waterproofing Systems
- Hyranger® Waterproofing System
- Cityflor® Waterproofing System
- Excel® Waterproofing System
Hy.adh
Hyranger SPOT ADH Self-Adhesive Membrane
Hyranger SPOT ADH is a self-adhesive, stabilised polyester reinforced SBS elastomeric modified bitumen waterproofing membrane used as a base layer in a multilayer waterproofing system. The under surface is covered with a peel-off film. The under surface and side lap are self-adhesive. The width of the side lap is 7cm.
35py.ar
35 PY Angle Reinforcement
35 PY Angle Reinforcement is a polyester reinforced SBS elastomeric membrane.
Angle Reinforcement for application on upstands, as detail and perimeter detail reinforcement and as pipe and other detail reinforcement.
F4t
Force 4000 Trafic Capsheet
FORCE 4000 TRAFIC is a stabilised polyester reinforced, SBS elastomeric modified bitumen waterproofing membrane treated with anti-root additive and used as a capsheet in a warm roof, multilayer, living roof system. Its surface is finished with Natural Slate mineral granules.
Ra
Retaining Angle
Axter's range of retaining angles are high quality, simple to install roof edge trims and termination bars providing a durable and neat finish for the edge of flat roofs.
Rp
Riverstone Pebbles / Ballast
20-40mm natural stone pebbles for borders and ballast, suitable for use with all types of Axter waterproofing systems where system ballast is required. Also used to create perimeter sterile borders on Axter living roof installations.
Hd.s.wf
HydroSoil Wildflower System
Comprising a water retention and drainage layer with bonded filter fleece, engineered growing medium and wildflower blanket, Axter's living or green roof systems are designed to accommodate the most varied ecological and environmental requirements.